No Snmp Access - Siemens SCALANCE XM-400 Configuration Manual

Result
The settings for access to an SNMP group are configured.
Further notes
You delete the access to an SNMP group with the
You display the configured SNMP groups with the
You display the access configurations for SNMP groups with the
command.
You display the configured SNMP tree views with the
7.8.2.5

no snmp access

Description
With this command, you delete the access to an SNMP group.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp access <GroupName> {v1|v2c|v3 {auth|noauth|priv}}
The parameters have the following meaning:
Parameter
GroupName
Version
Authentication
Result
The access to an SNMP group is deleted.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Name of the group to which access is
deleted
Selects the version of the protocol
used
Selects the authentication method:
command.
no snmp access
command.
show snmp group
show snmp group access
show snmp viewtree
Range of values / note
max. 32 characters
•
v1
•
v2c
•
v3
•
auth
•
noauth
•
priv
Network protocols
7.8 SNMP
command.
395