Network structures
6.1 VLAN
6.1.2.10
no vlan
Description
With this command, you delete a VLAN on the device.
Requirement
● The VLAN must not be assigned to a physical port.
● You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameter:
no vlan <vlan-id(1-4094)>
Parameter
vlan-id
The VLAN with number 1 cannot be deleted.
Result
The VLAN is deleted
Further notes
With the
You can display information about the VLAN with the
6.1.2.11
vlan range
Description
With this command, you can select several VLANs and configure them together. The
configurations are valid for all selected VLANs.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
198
Description
Number of the addressed VLAN
command, you create a VLAN on the device.
vlan
Range of values / note
1 ... 4094
command.
show vlan
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11