Spanning-Tree Mst - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.3 Spanning Tree
The parameters have the following meaning:
Parameter
cost
disable
link-type
portfast
port-priority
Note
Configure multiple properties
With each call of the command, you can configure precisely one property.
If you want to configure several properties, call the command several times.
Result
The selected setting was reset to the default value.
Further notes
You configure the setting with the
You display these settings and other information with the commands that start with
spanning tree ...
6.3.5.3

spanning-tree mst

Description
With this command, you configure the various properties of the Multiple Spanning Tree
function:
● With the
● With the
Multiple Spanning Tree configuration.
● With the
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
260
Description
Keyword for the costs of the port for calculating the lowest-cost path.
Enables the interface for spanning tree.
Connection status of the following network segment
Disables the PortFast function.
Keyword for the priority of the interface
spanning-tree
.
option, you configure the port costs used to calculate the lowest-cost path.
cost
option, you configure the priority of the interface for negotiating a
port-priority
option, you disable the interface for the Multiple Spanning Tree function.
disable
command (properties).
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
show