Show Vrrp Interface - Siemens SCALANCE XM-400 Configuration Manual

Layer 3 functions
9.4 VRRPv2 (IPv4)
The parameters have the following meaning:
Parameter
vlan
vlan-id
VrId
brief
detail
statistics
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 42)".
Result
The settings of the virtual router are displayed.
9.4.1.2

show vrrp interface

Description
This command shows the settings of VRRP for the interface.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show vrrp interface [vlan <vlan-id(1-4094)>] [{brief|detail|statistics}]
The parameters have the following meaning:
Parameter
vlan
vlan-id
brief
detail
statistics
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 42)".
618
Description
Keyword for a VLAN connection
Number of the addressed VLAN
ID of the virtual router
shows brief information on VRRP
shows detailed information on VRRP.
shows the statistics of the VRRP pro-
tocol
or
cli#
Description
Keyword for a VLAN connection
Number of the addressed VLAN
shows brief information on VRRP
shows detailed information on VRRP.
shows the statistics of the VRRP pro-
tocol
Range of values / note
-
1 ... 4094
1 ... 255
-
-
-
Range of values / note
-
1 ... 4094
-
-
-
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11