Spanning-Tree Bpdu-Receive; Spanning-Tree Bpdufilter - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

spanning-tree bpdu-receive

With this command, you enable or disable the BPDU receive status at the port.

You are in the Interface Configuration mode.

The command prompt is as follows:

cli(config-if-$$$)#

Call up the command with the following parameters:

spanning-tree bpdu-receive{enabled|disabled}

The parameters have the following meaning:

The BPDU receive status is enabled or disabled.

Further notes

You can display the status of this function and other information with the

With this command, you configure the BPDU transmit status for a port.

You are in the Interface Configuration mode.

The command prompt is as follows:

cli(config-if-$$$)#

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

BPDU packets are received at the port

BPDU packets are ignored at the port

command with the

Network structures

6.3 Spanning Tree

Range of values / note

Default: enabled

show spanning-tree