Further notes
You can display the status of this function and other information with the
snooping
8.8.3.4
ipv6 mld snooping version
Description
This command specifies which version of MLD the device will use in this VLAN.
Requirement
You are in the VLAN configuration mode.
The command prompt is as follows:
cli(config-vlan-$$$)#
Syntax
Call up the command with the following parameters:
ipv6 mld snooping version {v1 | v2}
The parameters have the following meaning:
Parameter
v1
v2
Result
The version of MLD used by the device in this VLAN is specified.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
Description
MLDv1
MLDv2
Default
Layer 2 management protocols
8.8 MLD Snooping (IPv6)
show ipv6 mld
509