Clear Line Vty - Siemens SCALANCE XM-400 Configuration Manual

Configuration
3.1 System
The parameters have the following meaning:
Parameter
interface-type
interface-id
For information on identifiers of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 42)".
If no parameters are specified, the counters for all interfaces are reset.
Result
The counters of the interface are reset.
Further notes
You can display the statistical information of the interfaces with the
counters
3.1.3

clear line vty

Description
With this command, you close a console session on the device.
With the
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call up the command with the following parameters:
clear line vty {<line-number(2-9)>|all}[forceful-clear]
The parameters have the following meaning:
Parameter
line-number
all
forceful-clear
74
Description
Type or speed of the interface
Module no. and port no. of the interface
command.
option, you close a session and that is not reacting.
forceful-clear
Description
Number of the connection that will be
terminated
terminates all connections
closes a session that is not reacting
Range of values / note
Specify a valid interface.
show interfaces -
Range of values / note
2 ... 9
-
-
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11