No Redistribute - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call up the command with the following parameters:
redistribute {static | connected | rip | default | all}
The parameters have the following meaning:
Parameter
static
connected
rip
default
all
Result
Which routes are distributed via OSPF is specified.
Further notes
You enable the ASBR router with the
You disable the distribution of the routes with the
You create the information for the routes with the
You create the information for external the routes with the
command.
9.2.3.22

no redistribute

Description
With this command, you disable distribution of routes with OSPF.
Note
This command is available only with layer 3.
Requirement
● The router is an ASBR router.
You are in the OSPF Router configuration mode.
The command prompt is:
cli(config-ospf)#
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
static routes
connected routes
RIP routes
standard routes
all routes
ASBR Router
command.
command.
no redistribute
command.
redist-config
default-information originate
Layer 3 functions
9.2 OSPFv2 (IPv4)
545