No Rp-Static Rp-Address - Siemens SCALANCE XM-400 Configuration Manual

Layer 3 functions
9.10 PIM (IPv4)
The parameters have the following meaning:
Parameter
Group Address
Group Mask
IP address
Result
The interface is a static rendezvous point.
Further notes
You delete the static RPs with the
You display the static rendezvous points with the
9.10.4.4

no rp-static rp-address

Description
With this command, you delete static rendezvous points.
Requirement
You are in the PIM configuration mode.
The command prompt is as follows:
cli(router-pim)#
Syntax
Call up the command with the following parameters:
no rp-static rp-address <Group Address> <Group Mask>
The parameters have the following meaning:
Parameter
Group Address
Group Mask
768
Description
Address of the multicast group for
which the interface will become
RP.
Subnet mask that restricts the
multicast band
IP address of the interface that will
become RP
Description
Address of the multicast group
Subnet mask that restricts the multicast
band
Range of values / note
-
-
-
no rp-static rp-address
show ip pim rp-static
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
command.
Range of values / note
-
-