Rmon Event - Siemens SCALANCE XM-400 Configuration Manual

no rmon alarm <number (1-250)>
The parameter has the following meaning:
Parameter
number
Result
The entry for monitoring a MIB variable is deleted.
12.5.2.5

rmon event

Description
With this command, you configure an event in the RMON Event Table.
You specify its name and the owner and whether or not an SNMP trap is generated.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
rmon event <number(1-500)>[description<event-description(127)>]
[owner<ownername(127)>][trap<notify(127)>]
The parameters have the following meaning:
Parameter
number
description
event-description
owner
ownername
trap
notify
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Number of the alarm to be deleted
Description
Number of the event
Title of the event
Description of the event
User to which the event is assigned
User name of the user
Specifies whether an SNMP trap
should be sent
Name of the community to which the
SNMP trap will be sent
Diagnostics
12.5 RMON
Range of values / note
1 ... 250
Range of values / note
1 ... 500
-
max. 127 characters
-
max. 127 characters
-
max. 127 characters
939