Dhcpv4 Client (Ipv4); The "Show" Commands; Show Ip Dhcp Client Stats - Siemens SCALANCE XM-400 Configuration Manual

Result
IPv6 router advertisement packets are not distributed.
Further notes
You display this setting and other information with the
You disable the distribution of IPv6 router advertisement packets with the command
suppress-ra
7.3

DHCPv4 client (IPv4)

This section describes commands of the Dynamic Host Configuration Protocol (DHCP).
7.3.1

The "show" commands

This section describes commands with which you display various settings.
7.3.1.1

show ip dhcp client stats

Description
With this command, you display the statistical counters of the DHCP client.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip dhcp client stats
Result
The counters are displayed.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
.
or
cli#
Network protocols
7.3 DHCPv4 client (IPv4)
command.
show ipv6 interface
ipv6 nd
331