Nfc Active; No Nfc Active - Siemens SCALANCE XM-400 Configuration Manual

3.6.2.1

nfc active

Description
With this command, you activate NFC.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
nfc active
Result
NFC is activated.
Further notes
You deactivate NFC with the
You display the status, i.e. whether the NFC function is activated or deactivated with the
command
3.6.2.2

no nfc active

Description
With this command, you deactivate NFC.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no nfc active
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
no nfc active
show nfc active status
3.6 NFC (SCALANCE XM-400 only)
command.
.
Configuration
141