Vrrp Track Decrement - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Layer 3 functions

9.5 VRRPv3 (IPv4 / IPv6)

vrrp track decrement

With this command you assign a VRRP interface to an interface tracking and configure the

value by which the priority is reduced.

This command is available only with layer 3.

You are in the VRRP Interface configuration mode.

The command prompt is as follows:

cli(config-vrrp-v3-if-$$$)#

Call up the command with the following parameters:

vrrp <vrid(1-255)> track <group-index> decrement <integer(1-254)>

The parameters have the following meaning:

A VRRP interface is assigned to interface tracking. The value by which the priority will be

reduced is defined.

Further notes

You delete the configuration with the

You display the assignment and value of the priority with the command

vrrp interface

You configure the tracking of interfaces with the

ID of the virtual router

ID of the interface tracking

Value by which priority of the VRRP inter-

face will be reduced

no vrrp track

with the parameter

track interface

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

Range of values / note