No Spanning-Tree Compatibility - Siemens SCALANCE XM-400 Configuration Manual

Result
The compatibility version of the protocol is selected.
Further notes
You can reset the setting to the default
command.
You can display the status of this function and other information with the
detail
You can display information about active ports with the
command.
6.3.4.4

no spanning-tree compatibility

Description
With this command, you reset the compatibility version of the protocol of the spanning tree
function to the default value.
The default value is MST.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no spanning-tree compatibility
Result
The compatibility version is reset to the default value.
Further notes
You configure the setting with the
You can display the status of this function and other information with the
detail
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
command.
with the
mst no spanning-tree compatibility
show spanning tree active
spanning-tree compatibility
Network structures
6.3 Spanning Tree
show spanning tree
command.
show spanning tree
247