No Ip Pim Routing - Siemens SCALANCE XM-400 Configuration Manual

Layer 3 functions
9.10 PIM (IPv4)
Syntax
Call the command without parameters:
ip pim routing
Result
PIm is enabled on all interfaces of the device.
Further notes
You disable PIM globally on the device with the
You display detailed settings for PIM with the
9.10.3.2

no ip pim routing

Description
With this command, you disable PIM globally on the device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no ip pim routing
Result
PIM is disabled on all interfaces of the device.
Further notes
You enable PIM globally on the device with the
You display detailed settings for PIM with the
762
command.
no ip pim routing
show ip pim interface detail
command.
ip pim routing
show ip pim interface detail
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
command.