Media Type - Siemens SCALANCE XM-400 Configuration Manual

Configuration
3.1 System
The parameters have the following meaning:
Parameter
transmit
receive
Note
Disabling both options
When you call this command, you can only select one option.
If you want to disable both options, call up the command again.
Result
Sending or receipt of LLDP packets is disabled.
Further notes
You enable the sending or receipt of LLDP packets with the
3.1.13.9

media type

Description
With this command, you configure the mode of a combo port.
Note
This command only influences combo ports.
If you attempt to configure a different port with this command, an error message will be
displayed.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
media-type {auto|rj45|sfp}
98
Description
the sending of LLDP packets is disabled
the receipt of LLDP packets is disabled
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
command.
lldp
Configuration Manual, 06/2016, C79000-G8976-C252-11