Network structures
6.4 Passive Listening
6.4
Passive Listening
6.4.1
The "show" commands
This section describes commands with which you display various settings.
6.4.1.1
show passive-listening
Description
This command shows whether or not "passive listening" is enabled.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show passive-listening
Result
disabled
enabled
6.4.2
Commands in the global configuration mode
This section describes commands that you can call up in the Global configuration mode.
In Privileged EXEC mode, enter the
Commands relating to other topics that can be called in the Global configuration mode can
be found in the relevant sections.
You exit the Global configuration mode with the
Privileged EXEC mode again.
280
or
cli#
is displayed if "passive listening" is disabled. If "passive listening" is enabled,
is displayed.
command to change to this mode.
configure terminal
or
end
exit
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command and are then in the