Tftp Filename - Siemens SCALANCE XM-400 Configuration Manual

Further notes
You enable the password for the user certificate with the
3.2.5.4

tftp filename

Description
With this command, you assign a name to a file type.
The file type decides the type that is affected by the
name decides the file to be copied to or from the TFTP server.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
tftp filename {showfiles|filetype< filetype >name<filename>}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
name
filename
Result
The file types are displayed or the file type is assigned a name.
Further notes
With the "
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Shows the available files
Keyword for a file type to be assigned
a name
Name of the file type
Keyword for a file name to be assigned
to the file type
Name of the file
" command, you can display the file types.
show loadsave files
3.2 Load and Save
command.
password
or
tftp load tftp save
Range of values / note
-
-
max. 100 characters
-
max. 100 characters
Configuration
action. The
117