Track Links - Siemens SCALANCE XM-400 Configuration Manual

Layer 3 functions
9.4 VRRPv2 (IPv4)
9.4.3.5

track links

Description
With this command you define how many tracked interfaces need to change to the "down"
status, before the priority of the assigned VRRP interface is changed.
Note
This command is available only with layer 3.
Requirement
You are in the VRRP Router configuration mode.
The command prompt is as follows:
cli(config-vrrp)#
Syntax
Call up the command with the following parameters:
track <group-index> links <links-to-track(1-255)>
The parameters have the following meaning:
Parameter
group-index
links-to-track
Result
The number of tracked interfaces is defined.
Further notes
You delete the configuration with the
You configure the tracking of interfaces with the
You display the configured number of tracked interfaces with the
626
Description
ID of the interface tracking
Number of interfaces
no track links
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
-
1 ... 255
command.
command.
track interface
show vrrp track
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.