Show Sntp Broadcast-Mode Status; Show Sntp Unicast-Mode Status - Siemens SCALANCE XM-400 Configuration Manual

System time
5.3 SNTP Client
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show sntp status
Result
The settings of SNTP are displayed.
5.3.1.2

show sntp broadcast-mode status

Description
This command shows the current configuration of the broadcast mode of SNTP.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show sntp broadcast-mode status
Result
The current SNTP broadcast configuration is displayed.
5.3.1.3

show sntp unicast-mode status

Description
This command shows the current configuration of the unicast mode of SNTP.
166
or
cli#
or
cli#
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11