No Spanning-Tree Passive-Listening-Compatibility - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.3 Spanning Tree
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
spanning-tree passive-listening-compatibility
Result
The "Enhanced Passive Listening Compatibility" function is enabled.
Further notes
You disable the function with the
command.
You can display the status of this function with the
compatibility
6.3.4.11

no spanning-tree passive-listening-compatibility

Description
With this command you disable the "Enhanced Passive Listening Compatibility" function.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
no spanning-tree passive-listening-compatibility
Result
The "Enhanced Passive Listening Compatibility" function is disabled.
Further notes
You enable the function with the
You can display the status of this function with the
compatibility
252
no spanning-tree passive-listening-compatibility
command.
spanning-tree passive-listening-compatibility
command.
show spanning-tree passive-listening-
show spanning-tree passive-listening-
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.