Ipv6 Mld Snooping Port-Purge-Interval - Siemens SCALANCE XM-400 Configuration Manual

The parameters have the following meaning:
Parameter
Vlan
vlan id
Result
The counters are reset.
8.8.2.6

ipv6 mld snooping port-purge-interval

Description
The time after which a port is deleted from the list if no MLD packets are received is known
as the purge time.
With this command, you configure this purge time for a port or for a VLAN in seconds.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
ipv6 mld snooping port-purge-interval <(130 - 1225) seconds>
The parameters have the following meaning:
Parameter
-
Result
The purge time is configured.
Further notes
You can reset the setting to the default with the
command.
You can display the status of this function and other information with the
snooping globals
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Keyword for a VLAN
Number of the addressed VLAN
Description
Value for the purge time in seconds
command.
Layer 2 management protocols
8.8 MLD Snooping (IPv6)
Range of values / note
-
1 ... 4094
Range of values / note
130 ... 1225
Default: 260
ipv6 mld snooping port-purge-interval
show ipv6 mld
505