No Match Interface - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call up the command with the following parameters:
match interface {Vlan < vlan-id(1-4094)> | <interface-type> < interface-id> }
The parameters have the following meaning:
Parameter
Vlan
vlan-id
interface-type
interface-id
Result
The filter for the interface is created.
Further notes
You delete the filter for the interface with the
You change to the Route maps configuration mode with the command
You display the setting and other information with the
9.8.3.6

no match interface

Description
With this command, you delete the filter for the interface.
Note
This command is available only with layer 3.
Requirement
You are now in the Route maps configuration mode.
The command prompt is as follows:
cli(config-rmap-$$$)#
Syntax
Call up the command with the following parameters:
no match interface {Vlan < vlan-id(1-4094)> | <interface-type> < interface-id> }
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Keyword for a VLAN
Keyword for a VLAN connection
Type or speed of the interface
Module no. and port no. of the
interface
Range of values / note
-
1 ... 4094
Enter a valid interface.
no match interface
show route-map
Layer 3 functions
9.8 Route maps (IPv4 / IPv6)
command.
.
route-map
command.
717