Private-Vlan - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.1 VLAN
The parameters have the following meaning:
Parameter
interface-type
/a-b,0/c,...
port-channel
a,b,c-d
untagged
all
forbidden
name
vlan-name
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 42)".
Result
The ports are removed from the VLAN configuration.
Further notes
It is possible to remove individual ports from a VLAN configuration without needing to rewrite
the entire configuration (in contrast to creating ports because it is not possible to add
individual ports later).
You display details of the function with the
You configure the setting with the
6.1.4.5

private-vlan

Description
With this command you define a VLAN as a private VLAN and specify the PVLAN type.
Requirement
You are in the VLAN Configuration mode.
The command prompt is as follows:
cli(config-vlan-$$$)#
222
Description
Type of interface
Port no. of the interface
Keyword for a port channel
Port no. of the interface
Keyword for interfaces or ports that transfer
data packets without VLAN marking
Specifies that all interfaces or ports are set
to "untagged"
Keyword for forbidden interfaces or ports
Keyword for the name assignment
Name of the VLAN
show vlan
command.
ports
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
Enter a valid interface.
-
Enter a valid interface.
-
-
-
-
max. 32 characters
command.
Configuration Manual, 06/2016, C79000-G8976-C252-11