No Ip Igmp; Ip Igmp Explicit-Tracking - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

no ip igmp

With this command, you disable IGMP on an interface.

You are in the Interface Configuration mode of VLAN.

The command prompt is as follows:

cli(config-if-vlan-$$$)#

Call the command without parameter assignment:

IGMP is disabled on the interface.

Further notes

You enable IGMP on an interface with the

You display the setting and other information with the

With this command, you enable die function "Explicit Tracking" on an interface.

If the "Explicit Tracking" function is enabled, the multicast router tracks precisely which

clients log on to a multicast group (Join) and log off (Leave). As soon as the last client has

logged off from a multicast group, the multicast router deleted the multicast group. Since the

multicast router has precise information about the logged on and logged off clients, the

multicast router does not need to query whether a further client wants to receive the

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

Layer 2 management protocols

show ip igmp global-config