Fmp Rx-Power - Siemens SCALANCE XM-400 Configuration Manual

Requirement
You are in the Interface configuration mode.
The command prompt is:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
rmon power-loss [req]<1/10 dBm> [dem]<1/10 dBm>
The parameters have the following meaning:
Parameter
req
dem
Result
The limits for monitoring the power loss are defined.
Further notes
You enable this function with the
You disable this function with the
You display the status of this function and other information with the
show fmp limit
You define the limit values for the received power with the command
12.2.2.4

fmp rx-power

Description
With this command, you specify the limit values for monitoring the received power per port.
Requirement
You are in the Interface configuration mode.
The command prompt is:
cli(config-if-$$$)#
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Specify the value at which you are informed of
the power loss of the connection by a message
of the severity level "Warning"
Specify the value at which you are informed of
the power loss of the connection by a message
of the severity level "Critical"
commands.
Range of values / note
0 ... -55 dB
Default: -50 dB
0 ... -55 dB
Default: -55 dB
command.
fmp
command.
no fmp
Diagnostics
12.2 FMP
and
show fmp stauts
.
fmp rx-power
909