Clear Spanning-Tree Detected Protocols - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

The parameters have the following meaning:

forward-time

The settings of the root bridge for the spanning tree function are displayed.

clear spanning-tree detected protocols

With this command, you restart the protocol transmission process on a specific or on all

interfaces and force renegotiation of the connection settings with the neighboring devices.

You are in the Privileged EXEC mode.

The command prompt is as follows:

Call up the command with the following parameters:

clear spanning-tree detected protocols

[{interface<interface-type><interface-id>}]

The parameters have the following meaning:

interface-type

interface-id

For information on names of addresses and interfaces, refer to the section "Interface

identifiers and addresses (Page 42)".

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

Shows the MAC address of the root bridge

Shows the costs of the connection to the root bridge.

Shows the time that the bridge is in the listening mode when changing from

the blocking mode to the learning mode

Shows the ID of the root bridge

Shows the maximum age of the data packet after which it is deleted

Shows the interface via which the spanning tree is set up

Shows the priority of the bridge

Shows detailed information about the root bridge

Keyword for a an interface description

Type or speed of the interface

Module no. and port no. of the interface

Network structures

6.3 Spanning Tree

Range of values / note

Enter a valid interface.