6.3.4.9
no spanning-tree mst instance-id root
Description
With this command, you disable the "root bridge" function on the device.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no spanning-tree mst{instance-id<instance-id(1-64)>}root
The parameters have the following meaning:
Parameter
instance-id
instance-id
Result
The "root bridge" function is disabled.
Further notes
You enable the root bridge function with the
You display this setting and other information with the commands that start with
spanning tree ...
6.3.4.10
spanning-tree passive-listening-compatibility
Description
With this command you enable the "Enhanced Passive Listening Compatibility" function.
If you enable the "Enhanced Passive Listening Compatibility" function, the IE switch sends
topology change frames via the (R)STP edge port that caused the topology change.
Requirement
You are in the Global configuration mode.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Keyword for the instance
Number of the instance
.
Range of values / note
-
1 ... 64
spanning-tree mst instance-id root
Network structures
6.3 Spanning Tree
command.
show
251