Loopd Reaction Local - Siemens SCALANCE XM-400 Configuration Manual

Result
The blocked port is enabled again.
Further notes
You disable the setting with the
You can display the status of this function and other information with the
command.
12.3.3.4

loopd reaction local

Description
With this command, you activate the "disable" reaction for a local loop. If a local loop is
detected, the port is blocked.
Requirement
● Loop detection is enabled.
● You are in the Interface configuration mode.
The command prompt is:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
loopd reaction local
Result
"disable" is activated for the
"disable" is the default after enabling loop detection.
Further notes
You enable the "no action" reaction with the
You can display the status of this function and other information with the
command.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
no loopd port reset
function.
loopd reaction local
no loopd reaction local
12.3 Loop detection
command.
show loopd
command.
show loopd
Diagnostics
919