Role - Siemens SCALANCE XM-400 Configuration Manual

Result
The password policy is specified:
Further notes
You assign a new password with the
You display the setting with the
11.1.4.2

role

Description
With this command, you create roles that are valid locally on the device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
role <role-name> function-rights <function-rights-value(1-15)> [description <role-
description>]
The parameters have the following meaning:
Parameter
role-name
function-rights
function-rights-
value
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
user-account
show password-policy
Description
Role name
Keyword for the function rights
Value of the function rights
Security and authentication
11.1 User management
command.
command.
Range of values / note
Enter a name for the role. The name
must meet the following conditions:
It must be unique.
•
It must be between 1 and 64 charac-
•
ters long.
-
Select the function rights of the role.
1
•
Users with this role can read device
parameters but cannot change them.
15
•
Users with this role can both read and
change device parameters.
807