No Dot1X Guest-Vlan - Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.7 Port-based Network Access Control (Dot1X)
Syntax
Call the command without parameters:
dot1x guest-vlan
Result
The guest VLAN function is enabled for the device.
Further notes
You also still need to enable the guest VLAN function for every port intended to use this
function. You do this with the
mode.
You disable the function with the
You display this setting and other information with the
11.7.2.2

no dot1x guest-vlan

Description
With this command, you disable the guest VLAN function for the device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no dot1x guest-vlan
Result
The guest VLAN function is disabled for the device.
Further notes
You enable the function with the
You display this setting and other information with the
868
command in the Interface configuration
dot1x guest-vlan
no dot1x guest-vlan.
command
dot1x guest-vlan.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command
command.
show dot1x
command.
show dot1x