System Time; System Time Setting; The "Show" Commands; Show Time - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

System time

This section describes commands relevant for the configuration of the system time.

This section describes commands with which you display various settings.

This command shows the settings of the system clock.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

The settings for the system clock are displayed.

This command shows all the entries for daylight saving time stored on the device.

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11