Show Ipv6 Mld Snooping Forwarding-Database; Show Ipv6 Mld Snooping Groups - Siemens SCALANCE XM-400 Configuration Manual

Layer 2 management protocols
8.8 MLD Snooping (IPv6)
8.8.1.2

show ipv6 mld snooping forwarding-database

Description
This command shows the multicast forwarding entries for all or a selected VLAN.
Requirement
● MLD snooping must be enabled globally and in the VLANs.
● You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show ipv6 mld snooping forwarding-database [Vlan <vlan id>]
The parameters have the following meaning
Parameter
vlan
vlan id
If you specify VLAN, the configuration of all VLANs is displayed.
Result
The multicast forwarding entries are displayed.
Further notes
You enable MLD snooping with the
8.8.1.3

show ipv6 mld snooping groups

Description
This command shows the information about the MLD snooping groups for all or a selected
VLAN.
498
or
cli#
Description
Keyword for a VLAN connection
Number of the addressed VLAN
command.
ipv6 mld snooping
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Range of values / note
-
1 ... 4094