No Ntp Server; Ntp Time Diff - Siemens SCALANCE XM-400 Configuration Manual

System time
5.2 NTP Client
Result
The connection to a server is configured on the NTP client.
Further notes
You delete the connection to a server with the
5.2.3.2

no ntp server

Description
With this command, you delete the connection to a server on the NTP client.
Requirement
You are in the NTP configuration mode.
The command prompt is as follows:
cli(config-ntp)#
Syntax
Call up the command with the following parameters:
no ntp server <integer (1-3)>
The parameter has the following meaning:
Parameter
integer
Result
The connection to a server is deleted on the NTP client.
Further notes
You configure the connection to a server with the
5.2.3.3

ntp time diff

Description
With this command, you configure the time difference between the device and the NTP
server.
164
no ntp server
Description
Number of the NTP server.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
command.
Range of values / note
1 ... 3
command.
ntp server
Configuration Manual, 06/2016, C79000-G8976-C252-11