No Ip Nat; Ip Nat Timeout - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Layer 3 functions

9.9 NAT (IPv4)

no ip nat

With this command you disable NAT/NAPT for the entire device.

You are in the Global Configuration mode.

The command prompt is as follows:

cli(config)#

Call the command without parameters:

NAT/NAPT is disabled globally for the entire device.

Further notes

You enable NAT/NAPT for the entire device with the

You display the current configuration with the command.

With this command you define periods of time after which existing connections are deleted if

there is no data exchange.

You are in the Global Configuration mode.

The command prompt is as follows:

cli(config)#

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11