No Snmp User; Snmp View - Siemens SCALANCE XM-400 Configuration Manual

Network protocols
7.8 SNMP
Further notes
You delete the settings with the
You display the configured users with the
7.8.2.21

no snmp user

Description
With this command, you delete the details of an SNMP user.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp user <UserName>
The parameter has the following meaning:
Parameter
UserName
Result
The details of the SNMP user are deleted.
Further notes
You change the settings with the
You display the configured users with the
7.8.2.22

snmp view

Description
With this command, you configure an SNMP view.
410
command.
no snmp user
show snmp user
Description
Name of the user
command.
snmp user
show snmp user
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
command.
Range of values / note
max. 32 characters
command.
Configuration Manual, 06/2016, C79000-G8976-C252-11