No Negotiation; Router-Advertisement-Block - Siemens SCALANCE XM-400 Configuration Manual

Configuration
3.1 System
Syntax
Call the command without parameters:
negotiation
Result
The automatic negotiation of connection parameters on an interface is activated.
Further notes
You disable the autonegotiation of connection parameters with the
command.
3.1.13.14

no negotiation

Description
With this command, you disable autonegotiation of connection parameters on an interface.
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no negotiation
Result
The automatic negotiation of connection parameters on an interface is deactivated.
Further notes
You enable the autonegotiation of connection parameters with the
3.1.13.15

router-advertisement-block

Description
With this command, you prevent Router Advertisements (RA) being received at a port.
102
no negotiation
negotiation
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.