Layer 2 management protocols
8.8 MLD Snooping (IPv6)
Syntax
Call the command without parameter assignment:
show ipv6 mld snooping globals
Result
The information is displayed.
8.8.1.5
show ipv6 mld snooping mrouter
Description
This command shows the ports at which IGMP queriers are connected for all or a selected
VLAN..
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call up the command with the following parameters:
show ipv6 mld snooping mrouter [Vlan <vlan index>] [detail]
The parameters have the following meaning:
Parameters
Vlan
vlan index
detail
Result
A list of the active ports is displayed.
8.8.1.6
show ipv6 mld snooping statistics
Description
This command shows the MLD snooping statistics for all or a selected VLAN.
500
Description
Keyword for a VLAN or VLAN range
Number of the addressed VLAN or VLAN range
Specifies that detailed information is displayed.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Range of values
-
1 ... 4094
-