Power; No Power - Siemens SCALANCE XM-400 Configuration Manual

Further notes
You enable the setting with the
You display the status of this function and other information
12.1.6.8

power

Description
With this command, you configure and activate the monitoring of the power supplies.
Requirement
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
Syntax
Call up the command with the following parameters:
power [{L1|L2}]
The parameters have the following meaning:
Parameter
L1
L2
If you do not select any parameters from the parameter list, the default value "L1 and L2" is
used.
Result
The setting for monitoring the power supplies is configured.
Further notes
You can display the current setting with the
You disable the function with the
12.1.6.9

no power

Description
With this command, you disable the monitoring of the power supplies.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
severity
Description
Monitoring of power supply 1
Monitoring of power supply 2
show events faults config
command.
no power
Diagnostics
12.1 Event and fault handling
.
show events severity
command.
901