No Set Metric; Set Tag - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

no set metric

With this command, you delete the setting that the metric of the routing information is

This command is available only with layer 3.

You are now in the Route maps configuration mode.

The command prompt is as follows:

cli(config-rmap-$$$)#

Call the command without parameter assignment:

no set metric

The metric of the routing information is not changed.

Further notes

You define the setting that the metric of the routing information is changed with the

You change to the Route maps configuration mode with the command

You display the setting and other information with the

With this command, you specify whether the routing information is forwarded with a changed

This command is available only with layer 3.

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

Layer 3 functions

9.8 Route maps (IPv4 / IPv6)

show route-map