Ip Igmp; No Ip Igmp - Siemens SCALANCE XM-400 Configuration Manual

Layer 2 management protocols
8.2 IGMP
8.2.2.1

ip igmp

Description
With this command, you enable IGMP globally on the device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
ip igmp
Result
IGMP is enabled.
Further notes
You disable IGMP with the
You display the setting and other information with the
command.
8.2.2.2

no ip igmp

Description
With this command, you disable IGMP globally on the device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
no ip igmp
438
command.
no ip igmp
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
show ip igmp global-config