No Track Links - Siemens SCALANCE XM-400 Configuration Manual

Layer 3 functions
9.5 VRRPv3 (IPv4 / IPv6)
Result
The number of tracked interfaces is defined.
Further notes
You delete the configuration with the
You configure the tracking of interfaces with the
You display the configured number of tracked interfaces with the
9.5.4.6

no track links

Description
With this command, you delete the the number of tracked interfaces.
Note
This command is available only with layer 3.
Requirement
You are in the VRRP Router configuration mode.
The command prompt is as follows:
cli(config-vrrp-v3)#
Syntax
Call up the command with the following parameters:
no track <group-index> links
The parameter has the following meaning:
Parameter
group-index
Result
The number of tracked interfaces is deleted.
Further notes
You configure the number of tracked interfaces with the
You display the configured number of tracked interfaces with the
656
no track links
Description
ID of the interface tracking
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
command.
command.
track interface
show vrrp track
Range of values / note
-
command.
track links
show vrrp track
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
command.