Security And Authentication; User Management; The "Show" Commands; Show Password-Policy - Siemens SCALANCE XM-400 Configuration Manual

Security and authentication

This part contains the sections that describe the access rights and authentication methods.
11.1

User management

This section describes commands for access as administrator and the configuration of the
authentication methods.
When you transfer the configuration of a device to TIA, the configured users, roles and
groups are not transferred.
11.1.1

The "show" commands

This section describes commands with which you display various settings.
11.1.1.1

show password-policy

Description
This command shows which password policy is currently being used.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show password-policy
Result
The currently valid password policy is displayed.
Further notes
You configure the password policy with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
password policy
11
801