Ip Nat Napt; No Ip Nat Napt - Siemens SCALANCE XM-400 Configuration Manual
Simatic net industrial ethernet switches command line interface (cli)
Hide thumbs
Also See for SCALANCE XM-400:
- Configuration manual (832 pages) ,
- Operating instructions manual (80 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
Layer 3 functions
9.9 NAT (IPv4)
9.9.3.3
ip nat napt
Description
With this command, you enable NAPT for the selected IP interface.
Requirement
You are in the Interface configuration mode
The command prompt is as follows:
cli(config-if-$$)#
Syntax
Call the command without parameter assignment:
ip nat napt
Result
NAPT is activated for the selected IP interface.
Further notes
You disable NAPT for the selected IP interface with the
You display the current configuration with the
9.9.3.4
no ip nat napt
Description
With this command, you disable NAPT for the selected IP interface.
Requirement
You are in the Interface configuration mode
The command prompt is as follows:
cli(config-if-$$)#
Syntax
Call the command without parameter assignment:
no ip nat napt
744
no ip nat napt
command.
show ip nat summary
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
Advertisement
Table of Contents
