Further notes
You disable the function with the
You can display the status of this function and other information with the
dot1x
11.7.3.16
no dot1x reauthentication
Description
With this command, you disable the function that repeats the authentication of the client by
the authenticator periodically.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no dot1x reauthentication
Result
Periodic authentication is disabled.
Further notes
You enable the function with the
You can display the status of this function and other information with the
dot1x
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
command.
11.7 Port-based Network Access Control (Dot1X)
no dot1x reauthentication
dot1x reauthentication
Security and authentication
command.
show
command.
show
881