Configuration Limits - Siemens SCALANCE XM-400 Configuration Manual

2.3

Configuration limits

Configuration limits of the device
The following table lists the configuration limits for Web Based Management and the
Command Line Interface of the device.
The usability of various functions depends on the device type you are using and whether or
not a KEY-PLUG is inserted.
Configurable function
System DNS server
Syslog server
E-mail server
SNMPv1 trap recipient
SNTP server
NTP server
DHCP pools
IPv4 addresses managed by the DHCP server (dynamic +
static)
Relay agent information for DHCP
DHCP static assignments per DHCP pool
Layer 2 Virtual LANs (port-based; including VLAN 1)
Protocol-based VLAN groups
Protocol-based VLAN groups per port
IPv4 subnet-based VLANs
Private VLAN
Primary PVLANs
Secondary isolated PVLANs
Secondary community PVLANs
Multiple Spanning Tree instances
Link aggregations or Etherchannels each with a maximum of 8
ports per aggregation
Ports in a link aggregation
Static MAC addresses in the Forward Database (FDB)
Multicast addresses without active GMRP
Multicast addresses with active GMRP
VLANs whose data traffic can be mirrored to a monitor port
RSPAN sessions
Layer 3 IP interfaces
Entries in the hardware routing table
Static routes
Possible routes to the same destination
DHCP Relay Agent interfaces
DHCP Relay Agent server
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
2.3 Configuration limits
Maximum number
3
3
3
10
2
3
24
575
5
24
257
12
12
150
1
1
24
256
16
8
8
256
512
50
255
1
127
4096
100
8
127
4
Description
37