The "Show" Commands; Show Loadsave Files; Show Loadsave Tftp - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Configuration

3.2 Load and Save

The "show" commands

This section describes commands with which you display various settings.

This command shows the current Load&Save file information.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show loadsave files

The current Load&Save file information is displayed.

This command shows the current configuration of the TFTP server for Load&Save.

Startup log file

This file contains the messages that were entered in the log during the last

This file contains the assignment of the user names to the corresponding

WBM favorite pages

This file contains the favorites that you created in the WBM.. You can down-

load this file and upload it in other devices.

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11