No Track Interface - Siemens SCALANCE XM-400 Configuration Manual

Layer 3 functions
9.5 VRRPv3 (IPv4 / IPv6)
Result
The selected interface is monitored.
Further notes
You delete an interface tracking with the
You display the configured interface tracking with the
You assign a VRRP interface to an interface tracking with the
command.
You configure the value by which the priority is reduced with the command
decrement
With the
change their status before the priority of the assigned VRRP interface is changed.
9.5.4.4

no track interface

Description
With this command, you delete the tracking of interfaces.
Note
This command is available only with layer 3.
Requirement
You are in the VRRP Router configuration mode.
The command prompt is as follows:
cli(config-vrrp-v3)#
Syntax
Call up the command with the following parameters:
no track <group-index> interface { vlan <vlan-id (1-4094)> | <interface-type>
<interface-id> }
The parameters have the following meaning:
Parameter
group-index
vlan
654
.
command you configure how many of the monitored interfaces need to
track links
Description
ID of the interface tracking
Keyword for a VLAN connection
no interface interface
show vrrp track
vrrp track decrement
Range of values / note
-
-
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
command.
vrrp track