No Gmrp - Siemens SCALANCE XM-400 Configuration Manual

Requirement
You are in the Global configuration mode
or
You are in the Interface configuration mode
The command prompt is as follows:
cli(config)#
cli (config-if-$$$) #
Syntax
Call the command without parameters:
gmrp
Result
In the Global configuration mode: The GMRP function is enabled on the device.
In the Interface configuration mode: The GMRP function is enabled for this interface.
Further notes
You need to enable GMRP globally for this device before you enable GMRP for individual
interfaces.
If you want to enable or disable the function for a specific interface on the device, use the
gmrp
You can display the status of this function and other information with the
info
8.1.2.2

no gmrp

Description
With this command, you disable the GMRP function for all or individual interfaces on the
device.
Requirement
You are in the Global configuration mode
or
You are in the Interface configuration mode
The command prompt is as follows:
cli(config)#
cli (config-if-$$$) #
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command in the Interface configuration mode.
command.
Layer 2 management protocols
8.1 GARP
show vlan device
no
433