No Instance - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.3 Spanning Tree
Further notes
You cancel the assignment of the VLAN to an MST instance with the
You delete the MST instance with the
You display this setting and other information with the
configuration
6.3.6.2

no instance

Description
With this command, you cancel the assignment of a VLAN to an MST instance or delete the
MST instance.
Requirement
You are in the MSTP Configuration mode.
The command prompt is as follows:
cli(config-mst)#
Syntax
Call up the command with the following parameters:
no instance <instance-id (1-64)> [vlan <vlan-range>]
The parameters have the following meaning:
Parameter
instance-id
vlan
vlan-range
If you specify a VLAN or a VLAN range, the assignment to an MST instance is canceled.
If you do not specify a VLAN, the MST instance is deleted.
Result
The assignment of a VLAN to an MST instance is canceled or the MST instance is deleted.
Further notes
You assign a VLAN to an MST instance with the
You display this setting and other information with the
configuration
276
command.
Description
Number of the MST instance
Keyword for a VLAN connection
Range of VLANs that will be deleted
from the instance
command.
command.
no instance
show spanning-tree mst
command.
instance
show spanning-tree mst
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
no instance
Range of values / note
1 ... 64
-
enter the range limts with a hy-
phen or blank